How To Fix Dell Monitor Keeps Entering Power Save Mode?

Does the Dell monitor keeps entering power save mode? Keep reading this guide to find out why this is happening and how to fix it. When you aren’t in front of your monitor for a while, Power Save Mode is useful. As you work, it won’t be very pleasant if your monitor quickly goes into power save mode. Many people are experiencing this issue, and for some, it starts immediately. The words “Auto detect entering power save” or “Entering power save mode” are displayed to users, and their monitor enters power save mode. The Dell monitor keeps entering power save mode. This guide will explain why this is happening and how to fix it.

Why Is Dell Monitor Keeps Entering Power Save Mode?

The Monitor Deep Sleep feature in Dell settings is turned on, so your monitor keeps entering power save mode. If your monitor goes into power save mode when you turn it on, this could also be caused by a wrong RAM stick or motherboard battery (CMOS battery).

Other Causes: The power source or input cable (HDMI/Display) is broken, or the power save mode is turned on.

How To Fix Dell Monitor Keeps Entering Power Save Mode?

First, go to Dell settings and turn off the Monitor Deep Sleep feature. This will fix the “Dell Monitor Keeps Entering Power Save Mode” problem. If this doesn’t work, check the power source and the HDMI or display cable that is plugged in. You could also go to Windows Settings and turn off the Power Save Mode. Then, connect the RAM Sticks again or switch the motherboard battery. Putting your Dell monitor back to its original settings might help if nothing else works. Let’s get a full picture of all the ways!

Disable Monitor Deep Sleep Feature

• On your Dell monitor, open the OSD (On-Screen Display) Menu.
• Pick the “Others” option.
• The next step is to choose Monitor Deep Sleep. Finally, click Disable.

Check Power Source & Input Cable

• If your power cable is damaged or faulty, it won’t give your Dell monitor the power it needs.
• Check the power source, too, to make sure it’s not broken.
• The HDMI or display cable you’re using may need fixing.
• Change out the old HDMI cable for a new one.

Disable Power Save Mode From Windows Settings

• Open control panel.
• Type “power options” for Windows 10 or “Power & Battery” for Windows 11 in the search box. Then, click it when it comes up.
• Click “Show Additional Plans” now and go to the display settings.
• Turn off Display by setting the option to “Never.” (For the options of On Battery and Plugged In.)
• Also, set Never to Put the Computer to Sleep.
• Click Save Changes.

Reconnect RAM Sticks (Remove & Re-insert)

• Disconnect everything from your computer and turn it off.
• Take the memory modules out of your computer.
• Please take out the RAM module and use dry cotton to clean it.
• Slowly put the RAM module into the slot and restart your computer.

Factory Reset Dell Monitor

• You can access the OSD (On-Screen Display) menu on your Dell monitor by pressing the third button.
• Pick the “Others” option.
• Following that, scroll down and pick the Factory Reset option.
• Please confirm your choice by pressing the third button on your monitor.

Check to see if the monitor goes into power save mode after you restart your computer.

Conclusion:

We hope this guide was useful. Let us know how this guide works for you and which way worked best for you! Thank you!